Funktion SUP Paddle Board Surfboard Rail Tape in Honey Comb Design 3.584″ FK-RAILTAPE-L-HBCLR

February 4, 2020 - Comment

Funktion SUP Paddle board Surfboard Rail Tape in honey comb design 3.5*84″ FK-RAILTAPE-L-HBCLR Surfboard Rail Tape Features: ●Designed to suit the needs of SUP or Surfboard’s rail protection ●Easy installation ●UV resistant and perfectly crystaline adhesive Tips: ●Don’t install in a cold environment (below 20℃/68℉), recommend to install at room temperature ●Throughly clean the area with

Buy Now! $18.80Amazon.com Price
(as of April 19, 2020 11:20 pm EST - Details)

Funktion SUP Paddle board Surfboard Rail Tape in honey comb design 3.5*84″ FK-RAILTAPE-L-HBCLR

Surfboard Rail Tape
Features:
●Designed to suit the needs of SUP or Surfboard’s rail protection
●Easy installation
●UV resistant and perfectly crystaline adhesive

Tips:
●Don’t install in a cold environment (below 20℃/68℉),
recommend to install at room temperature
●Throughly clean the area with alcohol or similar,make sure no wax is present
●Pour plenty of water,it will help on having no air bubbles
●Squeeze from the center to the edges or from one side to the opposite so all air and water gets out
●Recommend to use after rail tape installed 24hours.
Specifications:
●Size:3.5*84″
●Qty:2pcs/Set
●Design:Honey comb surface motif design

Product Features

  • Funktion SUP Paddle board Surfboard Rail Tape 3.5*84″
  • 2pcs bundle together with velcro to fasten.
  • Raip Protection for Surfboard/SUP/Paddle board
  • Self-adhesive tape and Honey Comb Surface motif design only
  • Rail protection for your board!

Comments

Anonymous says:

So far, so good Looks and feels thick and durable, is clear, and goes on easily if done properly. The strips come rolled up, I flattened them out for 24 hours before applying.Then here’s what I did:1. Wiped the side of the board with rubbing alcohol that I dumped onto a SOFT paper towel.2. Sprayed the board GENEROUSLY with water.3. Dropped two drops of dish soap on the side of the board and rubbed it around with my hand to create some slip.4. Sprayed with more water.5…

Anonymous says:

Not the strongest adhesion on the market. The protective material itself is very strong, I will give it that. I also like the honeycomb texture. But the adhesive glue on the material is not the best on the market. 3M products are much stronger, so is railsaver pro. At half the cost, I decided to give it a try. I carefully applied it, taking my time working from front to back, center to edge. I even placed scraps of the waxy paper backing on the edges so they wouldn’t stick as I laid down the center line. Then I carefully removed…

Anonymous says:

Works to protect rail of paddle board Easy to apply after watching YouTube videos

Write a comment

*